DoneRight Article
Solutions to Peeling Stain:
Plants absorb and store moisture and nutrients in the root structure then draw them up the stem as required. Trees are simply just a large plant which means that lumber is that stem sliced up. Therefore, it is extremely important to stain and seal your deck. All stains are made of chemicals and compounds that are mixed. They all require stirring prior to application. Direct sunlight can cause the materials in the stain to separate, which will cause poor results. Often humidity or moisture will cause the stain to contaminate. If it is too warm or too cold stains often will give poor results. Solution 3: Solution 4: Coatings tend to fade over time. Vertical surfaces will weather at different rates than horizontals. If you have decided to re-stain only part of your deck, you may find it is now 2 different shades. This is particularly true when it comes to semi-transparent coatings. Solution 5:
Solution 1:
Seal all 4 sides as well as the ends to stabilize moisture content.
Solution 2:
Before applying stain, sand all surfaces with 80 grit sandpaper to open up the cells of the wood to accept the stain.
Rollers will lay stain on fast, however it won’t get the stain into the pores. You can apply with a roller but you should really go over it with a brush. Thin the stain 10% to keep it workable and enters the pores more readily.
Use a good quality stain with a track record. Price of product does not guarantee good performance.
Consider staining the deck surface in semi, and use a solid color on the verticals, (paint or stain). When it comes time to re-coat the horizontal surfaces, you won’t have to do the verticals as well.
